Omega 100

At heart of a perfect edge. Designed and manufactured according to the up-to-date concepts and structural principles, the OMEGA series, automatic multispindle belt polishing machine, is remarkable for its performance and production on every kind of marble and granite. Its complete equipment allows it to perform all the finishing operations on the materials used in the building field, furnishings and monuments. On steps, windowsills and other works with thickness from 10 to 60 mm (Omega 60) and from 10 to 100 mm (Omega 100) this machine is able to perform: calibration/gauging, straight edge, bevels, upper groove, lower groove, sloping cuts and their polishing, quirk miters (QM), slot cuts in general, bullnose, edges with regular round shapes (quarter bullnose, half bullnose, etc.). The machine can perform all the processing without the operator manual intervention.

Features

The exclusive features of a Comandulli machine Omega 100

• Steel structure, electro welded, fully worked by milling machine.
• All our machines are protected against corrosion through a modern treatment
  that follows different phases: sandblasting, metallization and painting The painted covers are subject to cataphoresis treatment, carters in stainless steel.
• Possibility of polishing the edges without the contrast bar, due to the special sliding system of the conveyor belt (a set of idle rollers is under the belt, guiding it in its proper grooves. In this way, the sliding friction becomes rolling friction) and the slab locking by pneumatic pistons.
• Oscillating operation of the edge polishing group by a lever system, original, patented, operated by hydraulic pistons electronically
• Oscillating mechanism, placed in its proper boxes, oil bath.
• Hydraulic working of the motors for the edge polishing.
• Each spindle is independent.
• Possibility of polishing straight edges on slabs of different thickness, one after the other.
• Water collection tank equipped with two lateral outlets.
• New hydraulic unit for substantial energy savings.
• Colour touch screen
• Possibility to set the belt speed from the control panel.

Equipment

Here we show you our concept of completeness.

• Calibrator/gauging.
• Automatic beveling spindles (pre-cut).
• Series of spindles for the edge (the first with diamond wheel generating the bullnose profile with automatic positioning).
• Series of beveling spindles.
• Spindle for lower / upper groove.
• Extendible bar to support pieces of big dimensions.
• Rollers for material loading/unloading

Options

There is always enough room for some further desires.

• Motorized positioning of calibrator, lower / upper groove units.
• Vertical spindle for calibrated strip polishing.
• Vertical spindle for bush hammering of the slab surface.
• Opposite upper groove spindle (double upper groove).
• Horizontal calibrating spindle
• Centralized automatic lubrication system.
• Beveling spindles with the possibility of horizontal positioning in addition to the straight edge polishing.

Technical Data

Workings