Elite
The ELITE is a CNC 5 interpolated axis bridge saw. The main characteristic of the machine is that the spindle can turn at 455° (-90°/+365°) , giving the possibility to cut in all the directions with fixed work-piece. This solution guarantees very precise cuts and very high productivity compared to the traditional saws. It is possible to rake the spindle at 90° (from horizontal to vertical), giving the possibility to the machine of all the functions of cut. All axes are moved by CNC
Features
GENERAL FEATURES
Cast iron bridge on which a disc holding spindle and a cutter holder spindle has been installed. The bridge moves on tracks by means of wheels automatically lubricated by grease, well protected; the movement is possible thanks to a motor reducer with kinematics mechanism pinion/rack, with inclined tooth, controlled by a Brushless motor.
Electro-spindle with 26,5 kw (in S6 service) which holds the disc with max. diameter 1000 mm; the disc is well protected by a stainless steel casing. The disc holding spindles move along the bridge on linear recirculation ball and guide assembly automatically lubricated by grease. The movement is carried on by a motor reducer with kinematics mechanism pinion/rack, with inclined tooth, controlled by a Brushless motor. The disc holding spindle height can be adjusted with a stroke of 600 mm; the adjustment is possible thanks to a motor reducer with screw kinematics mechanism controlled by a Brushless motor.
It is possible to turn the spindle at 455° (-90°/+365°) The movement is possible thanks to a motor reducer controlled by a Brushless motor.
It is possible to rake the spindle at 90° (from horizontal to vertical). The movement is possible thanks to a motor reducer controlled by a Brushless motor.
Metallised steel electro-welded fixed bench.
Electrical box on ground level and suspended machine push buttons panel. Automatic programming system of all movements and data visualised on display (touch screen)
Remote control electronic wheel.
Linear laser for material alignment checking and cutting direction.
Water system operated by solenoid valve and controlled by flow-meter.
Centralised lubrication system
Equipped by service spanners/wrenches, anchor bolts and attachments.
Sliding front doors protections, fixed barrier on the back side.
Technical Data
ELITE
Spindle longitudinal stroke (X axis)
mm
3800
Bridge transverse stroke (Y axis)
mm
2500
Vertical stroke (Z axis)
mm
600
Spindle rotation
°
455 (-90/+365)
Disc rake
°
0÷90
Disc diameter
mm
400÷1000
Holding disc spindle power
kw
26,5 (in S6 service)
Brides
mm
Ø 255
Maximum cutting depth
mm
370
Disc shaft diameter
mm
60
Spindle movement motor power (X axis)
kw
1,8
Bridge movement motor power (Y axis)
kw
1,8
Spindle downwards motor power (Z axis)
kw
1,8
Disc rotation speed
g/1′
500÷2500
Spindle movement speed (X axis)
m/1’
0÷35
Bridge movement speed (Y axis)
m/1’
0÷35
Spindle downwards speed (Z axis)
m/1’
0÷6
Maximum power installed
kw
32
Machine weight
kg
~ 6800
Workings
CUTTING FUNCTIONS
– in manual
– in semi-automatic
– in automatic
– to make the following works:
– longitudinal cuts
– transversal cuts
– inclined cuts
– circular cuts
– oblique cuts
– elliptical cuts
– cut of polygons
– cuts of arks (in vertical and in horizontal)
– inear and interpolate mouldings
– cutting slabs optimization
– writing
It is possible the programming both in the machine board and in office or, in alternative, to transmit the programs and drawings via cable, net or by USB
